UP-GF FITTINGS AND CONNECTIONS 
PP LINING / LINER FOR PIPE TYPE B
ACCORDING TO DIN 16 966





Fittings made of glass fibre reinforced polyester resins are produced according to DIN 16966, section 2, section 4 and section 5, on the basis of unsaturated polyester resins (UP resins), which are ideally suited for chemical usage under conditions of positive and negative pressure.

Glass fibre reinforced plastic (GFRP) on the basis of unsaturated polyester resins, including phenacrylate resins, is natural coloured, but can be dyed depending on application and use. Basically this material is flammable, however by adding appropriate aggregates in production, the state of "low flammability" or "self-extinguishing" can be reached. By adding graphite, the material will become conductive.

Kwerk GmbH delivers liner materials for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.

Our new product line:



The following are part of our delivery program:

- PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
- PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
- PVC C post-chlorinated polyvinylcloride as per DIN 8080
- PE-HD high-density polyethylene as per DIN 8075
- Polypropylene as per DIN 8078
- PVDF polyvinylidenfluoride

Our UP-GF fittings are free from defects, like air bubbles and cracks. The laminate structure according to DIN 16966 is guaranteed for the entire length. On principle, other UP-GF structures are available on request. During manufacture of UP-GF, all sealing surfacec and seams are properly laminated.

Further technical information you will find here.

 
 
DIN 16 966 regulates specific designs, quality and audit of UP-GF fittings. This includes in particular

- Negative pressure load
- Layer structure and glass contents
- Styrene content
- Surface quality
- Behaviour towards chemicals
- Adherence and rigidity
- Hygienic and toxicological safety
- Fire behaviour
- Dimensions
- Audit
- Short-time internal pressure tests

Our team, having nearly 40 years of work experience in production and application of UP-GF fittings and connections, will be pleased to answer any additional questions. Just call us: 0049 2602 999730




SUPPLY RANGE

DN 25 - DN 1000




 

UP-GF ELBOW 90°, PP LINING / LINER, FOR PIPE TYPE B


 

 
 
 




   

 
Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.


Product description UP-GF with PP lining /liner:
UP-GF-PP elbow 90°, DIN 16 966, form E1, pipe type B, liner PP, PN 10, with laminated ends in L form.

ELBOW DIN 16 966 - E1 B 100 - 10 - L - PP


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride


Nominal diameter
DN
Inside diameter
type of pipe D

d2
Inside diameter
type of pipe D

d2
overall length
25 25 32 110
(32) 32 40 130
40 40 50 150
50 50 63 180
65 65 75 140
80 80 90 165
100 100 110 205
(125) 125 125 245
150 150 160 285
200 200 200 365
250 250 250 450
300 300 300 525
350 250 355 600
400 400 400 680
500 500 500 830
600 600 600 950
700 700 710 1100
800 800 800 1250
900 900 900 1400
1000 1000 1000 1500
 
Dimensions correspond to DIN 16 966, part 2
All dimensions in mm
d 2 corresponds to the outer diameter of the lining for pipe type B.
Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1
Pressures are pressures in bar



UP-GF ELBOW 45°, PP LINING / LINER, FOR PIPE TYPE B


 

 
 
 
 





   


Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.


Product description UP-GF with PP lining /liner:
UP-GF-PP elbow 45°, DIN 16 966, form E2, pipe type B, liner PP, PN 10, with laminated ends in L form.

ELBOW DIN 16 966 - E2 B 100 - 10 - L - PP


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride


Nominal diameter
DN
Inside diameter
type of pipe D

d2
Inside diameter
type of pipe D

d2
overall length
e
25 25 32 70
(32) 32 40 80
40 40 50 90
50 50 63 105
65 65 75 85
80 80 90 100
100 100 110 115
(125) 125 125 135
150 150 160 150
200 200 200 190
250 250 250 225
300 300 300 260
350 250 355 290
400 400 400 325
500 500 500 390
600 600 600 430
700 700 710 490
800 800 800 545
900 900 900 605
1000 1000 1000 660
 
Dimensions correspond to DIN 16 966, part 2
All dimensions in mm
d 2 corresponds to the outer diameter of the lining for pipe type B.
Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1
Pressures are pressures in bar





UP-GF T-PIECE 90°, PP LINING / LINER, FOR PIPE TYPE B





 
 
 





   

 
Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.


Product description UP-GF with PP lining /liner:
T-piece 90°, pipe type B, form T2, pipe type B, nominal diameter DN 100 and nominal pressure PN 10, with laminated ends in L form.

T-piece DIN 16 966 - T2 B 100 - 10 - L


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride


Nominal diameter
DN
Inside diameter type of pipe D

d2
Inside diameter
type of pipe D

d2
overall length
e
25 25 32 110
(32) 32 40 130
40 40 50 150
50 50 63 180
65 65 75 140
80 80 90 165
100 100 110 205
(125) 125 125 245
150 150 160 285
200 200 200 365
250 250 250 450
300 300 300 535
350 350 355 600
400 400 400 680
500 500 500 830
600 600 600 950
700 700 710 1100
800 800 800 1250
900 900 900 1400
1000 1000 1000 150
 
Abmessungen entsprechen der DIN 16 966, Teil 4
Alle Maße in mm
d 2 entspricht beim Rohrtyp B dem Außendurchmesser der Auskleidung
Werkstoff: ungesättigtes Polyesterharz und Textilglas wie in DIN 16 966, Teil 1 festgelegt
Drücke sind Überdrücke in bar




 

UP-GF T-PIECE 90° WITH REDUCED BRANCH, PP LINING/LINER, FOR PIPE TYPE B


 
 
 
 



   
 
 
Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.


Product description UP-GF with PP lining /liner:
T-piece 90°, reduced,  pipe type B, form T2, nominal passage diameter DN1 = 100 and nominal branch diameter DN2 = 80, nominal pressure PN 10, with laminated ends in L form.

T-piece DIN 16 966 - T2 B 100 x 80 - 10 - L


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride



passageway

branch

e 1

e 2

passageway

branch

e 1

e 2

DN 1

d 2

DN 2

d 2

DN 1

d 2

DN 2

d 2
type of pipe D

type of pipe B

(32) 32 25 25 130 170 (32) 40 25 32 130 175
40 40 25
(32)
25
32
150 175 40 50 25
(32)
32
40
150 180
50 50 25
(32)
40
25
(32)
40
180 180 50 63 25
(32)
40
(32)
40
50
180 185
65 65 (32)
40
50
(32)
40
50
140 190 65 75 (32)
40
50
40
50
63
140 195
80 80 40
50
65
40
50
65
165 195 80 90 40
50
65
50
63
75
165 200
100 100 50
65
80
50
65
80
205 205 100 110 50
65
80
63
75
90
205 210
(125) 125 65
80
100
65
80
100
245 270 (125) 125 65
80
100
75
90
110
245 270
150 150 80
100
(125)
80
100
125
285 240
240
290
150 160 80
100
(125)
90
110
125
285 240
240
290
200 200 100
(125)
150
100
(125)
150
365 260
310
310
200 200 100
(125)
150
110
125
160
365 260
310
310
250 250 (125)
150
200
125
150
200
450 340 250 250 (125)
150
200
125
160
200
450 340
300 300 150
200
250
150
200
250
525 360
365
415
300 300 150
200
250
160
200
250
525 360
365
415
350 350 200
250
300
200
250
300
600 395
445
445
300 355 200
250
300
200
250
300
600 395
445
445
400 400 250
300
350
250
300
350
680 470
470
520
400 400 250
300
350
250
300
355
680 470
470
520
500 500 300
350
400
300
350
400
680 535
575
575
500 500 300
350
400
300
355
400
830 525
575
575
600 600 350
400
500
350
400
500
950 620
620
670
600 600 350
400
500
355
400
500
950 620
620
670
700 700 400
500
600
400
500
600
1000 675
725
750
700 710 400
500
600
400
500
600
1100 675
625
750
800 800 500
600
700
500
600
700
1250 775
800
800
800 800 500
600
700
500
600
710
1250 675
725
750
900 900 600
700
800
600
700
800
1400 850 900 900 600
700
800
600
710
800
1400 850
1000 1000 700
800
900
700
800
900
1500 905 1000 1000 700
800
900
710
800
900
1500 905
 
Dimensions correspond to DIN 16 966, part 4
All dimensions in mm
d 2 corresponds to the outer diameter of the lining for pipe type B.
Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1
Pressures are pressures in bar






UP-GF NOZZLE WITH PRE-FORMED COLLAR FOR PIPE TYPE B




 
 
 




   
 

Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.


Product description UP-GF with PP lining /liner:
Pre-formed collar,  pipe type B, form B2, nominal diameter DN 100, nominal pressure PN 10, with laminated ends in L form.

Collar DIN 16 966 - B2 B 100 - 10 - L


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride


Nominal diameter
DN
Perm. Operating pressure
PN

d 4

d 5

b 3

h 2
25 16 68 60 12 30
(32) 16 78 58 14 32
40 16 88 68 14 35
50 16 102 82 14 40
65 10 122 95 15 44
80 10 138 111 16 48
100 10 158 133 18 55
(125) 10 188 160 20 64
150 10 212 188 22 71
200 6 268 237 25 85
250 6 320 293 38 101
300 6 370 343 30 116
350 4 430 387 32 133
400 4 482 441 35 147
500 4 585 544 38 178
600 2,5 685 648 45 209
700 2,5 800 758 53 243
800 2,5 905 858 57 271
900 2,5 1005 960 60 302
1000 2,5 1110 1060 64 332
 
Dimensions correspond to DIN 16 966, part 2
All dimensions in mm
Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1
Pressures are pressures in bar


 


UP-GF NOZZLE WITH FIXED FLANGE FOR PIPE TYPE B



 
 
 



 

 
Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.


Product description UP-GF with PP lining /liner:
Pre-formed fixed flange,  pipe type B, form V3, nominal diameter DN 100, nominal pressure PN 10, with laminated ends in L form.

Fixed flange DIN 16 966 - V3 B 100 - 10 - L


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride


Nominal diameter
DN
Perm. Operating pressure
PN
D d 2 d 3 Lk b 2 h 1 r 2 r 3 screw
number
screw
thread
25 16 110 14 50 85 14 30 3 3 4 M 12
(32) 16 140 18 58 100 15 32 3 3 4 M16
40 16 250 18 68 110 16 35 3 3 4 M16
50 16 165 28 82 125 18 40 3 4 4 M16
65 20 285 18 95 145 20 44 3 4 4 M16
80 10 200 18 111 160 22 48 3 4 8 M16
100 10 220 18 133 180 24 55 4 5 8 M16
(125) 10 250 18 160 210 27 64 4 5 8 M16
150 10 285 22 188 240 30 71 4 5 8 M 20
200 6 340 22 245 295 33 80 5 8 8 M 20
250 6 395 22 300 350 37 90 5 8 12 M 20
300 6 445 22 350 400 42 100 5 8 12 M 20
350 4 505 22 410 460 40 95 6 8 16 M 20
400 4 565 26 460 515 44 105 6 8 16 M 24
500 4 670 26 565 620 49 120 6 8 20 M 24
600 2,5 780 30 660 725 49 115 7 8 20 M 27
700 2,5 895 30 780 840 53 125 7 8 24 M 27
800 2,5 1015 33 875 950 57 135 7 8 24 M 30
900 3,5 1115 33 980 1050 60 150 7 8 28 M 30
1000 2,5 1230 36 1080 1160 65 155 7 8 28 M 33
 
Dimensions correspond to DIN 16 966, part 6
Flange connection dimensions comply with DIN 2501 Part 1, PN 10
All dimensions in mm
Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1
Pressures are pressures in bar



 

UP-GF REDUCER - CONCENTRIC, PP LINING/LINER, FOR PIPE TYPE B


 
 
 




   

 
Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B.


Product description UP-GF with PP lining /liner:
Reducer, concentric, pipe type B, form C2, reduced from nominal diameter DN 100 to nominal diameter 80, nominal pressure PN 10, with laminated ends in L form.

Reducer DIN 16 966 - C2 B 100 x 80 - 10 - L PP


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride




UP-GF REDUCER - ECCENTRIC, FOR PIPE TYPE B




 
 
 



   

 
Composite materials / Liner:
Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ Rohrtyp B.


Product description UP-GF (pure GFRP):
Reducer, eccentric, pipe type B, form X2, reduced from nominal diameter DN 100 to nominal diameter 80, nominal pressure PN 10, with laminated ends in L form.

Reducer DIN 16 966 - X2 B 100 x 80 - 10 - L - PP


The following are part of our delivery program:

PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey
PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red
PVC C post-chlorinated polyvinylcloride as per DIN 8080
PE-HD high-density polyethylene as per DIN 8075
PP polypropylene as per DIN 8078
PVDF polyvinylidenfluoride


Reduction

L 1

L 2

L 3

L 4

L 5
Reduction

L 1

L 2

L 3

L 4
DN1 d2 DN2 d2 DN1 d2 DN2 d2

typ of pipe D

typ of pipe B
(32) 32 25 25 180 85 20 20 95 (32) 40 25 32 180 85 20 20
40 40 25 25 205 85 40 40 120 40 50 25
32
205
85 45
45
40 40 (32) 32 200 85 20 20 115 40 50 (32) 40 200 85 25 25
50 50 25 25 235 85 65 60 150 50 63 25 32 235 85 80 80
50 50 (32) 32 230 85 45 45 145 50 63 (32) 40 230 85 60 60
50 50 40 40 205 85 25 25 120 50 63 40 50 205 85 35 35
65 65 (32) 32 260 85 85 80 175 65 75 (32) 40 260 85
90 90
65 65 40 40 235 85 65 60 150 65 75 40 50 235 85 65 60
65 65 40 50 210 85 40 40 125 65 75 50
63 210 85 30 30
80 80 40 40 275 85 105 100 190 80 90 40 50 275 85 105 100
80 80 50 50 245 85 75 75 160 80 90 50 63 245 85 70 65
80 80 65 65 210 85 40 35 125 80 90 65 75 210 85 40 40
100 100 50 50 325 110 130 120 215 100 110 50 63 325 110 95 90
100 100 65 65 285 110 90 85 175 100 110 65 75 285 110 90 85
100 100 80 80 250 110 50 50 135 100 110 80 90 250 110 50 50
(125) 125 65 65 350 110 155 150 240 (125) 125 65 75 350 110 130 125
(125) 125 80 80 310 110 115 110 200 (125) 125 80 90 310 110 90 85
(125) 125 100 100 285 110 65 60 175 (125) 125 100 110 285 110 40 40
150 150 80 80 375 110 180 175 265 150 160 80 90 375 110 180 175
150 150 100 100 350 110 130 125 240 150 160 100 110 350 110 130 125
150 150 (125) 125 310 110 65 60 175 150 160 (125) 125 310 110 90 85
200 200 100 100 495 127 255 245 370 200 200 100 110 495 127 230 225
200 200 (125) 125 430 127 195 185 305 200 200 (125) 125 430 127 195 185
200 200 150 150 370 127 130 125 245 200 200 150 160 370 127 105 100
250 250 (125) 125 575 143 320 310 435 250 250 (125) 125 575 143 320 310
250 250 150 125 510 143 255 245 365 250 250 150 160 510 143 230 225
250 250 200 200 400 143 130 125 255 250 250 200 200 400 143 130 130
300 300 150 150 655 158 385 370 495 300 300 150 160 655 158 360 345
300 300 200 200 540 158 255 245 380 300 300 200 200 540 158 255 245
300 300 250 250 435 158 130 125 275 300 300 250 250 435 158 130 125
350 350 200 200 665 150 385 370 515 350 355 200 200 665 150 400 385
350 350 250 250 550 150 255 245 400 350 355 250 250 550 150 270 260
350 350 300 300 440 150 130 125 290 350 355 300 300 440 150 140 135
400 400 250 250 695 166 385 370 530 400 400 250 250 695 166 385 370
400 400 300 300 580 166 255 245 415 400 400 300 300 580 166 255 245
400 400 350 355 450 166 130 125 285 400 400 350 355 450 166 115 110
500 500 300 300 865 191 515 495 675 500 500 300 300 865 191 515 495
500 500 350 350 730 191 385 380 540 500 500 350 355 730 191 375 360
500 500 400 400 615 191 255 245 425 500 500 400 400 615 191 255 245
600 600 350 350 980 181 645 620 80 600 600 350 355 980 181 630 605
600 600 400 400 865 181 515 495 685 600 600 400 400 865 181 515 495
600 600 500 500 630 181 255 245 450 600 600 500 500 630 181 260 245
700 700 400 400 1160 197 775 740 945 700 710 400 400 1160 197 795 765
700 700 500 500 930 197 515 495 695 700 710 500 500 930 197 540 520
700 700 600 600 660 197 255 245 440 700 710 600 600 660 197 280 270
800 800 500 500 1180 213 775 740 405 800 800 500 500 1160 213 770 740
800 800 600 600 910 213 515 495 700 800 800 600 600 910 213 515 495
800 800 700 700 665 213 255 245 450 800 800 700 710 665 213 230 220
900 900 600 600 1185 230 775 740 955 900 900 600 600 1185 230 770 740
900 900 700 700 945 230 515 495 980 900 900 700 710 945 230 490 470
900 900 800 800 700 230 255 245 470 900 900 800 800 700 230 255 245
1000 1000 700 700 1220 245 775 740 975 1000 1000 700 710 1220 245 745 715
1000 1000 800 800 975 245 515 495 730 1000 1000 800 800 975 245 515 495
1000 1000 900 900 735 245 255 245 490 1000 1000 900 900 735 245 255 245
 





INFORMATION TO OUR DELIVERY PROGRAM



Plastic pipe systems


Overview of plastic pipe systems
Technical information on ABS pipe systems
Technical information on PVC  U pipe systems
Technical information on PVC  U transparent pipe systems
Technical information on PVC  C pipe systems
Technical information on PP pipe systems
Technical information on PP-R pipe systems
Technical information on PE pipe systems
Technical information on PVDF pipe systems

Chemiedur - pipe


Technical information on UP-GF (FRP) pipe systems
UP-GF (FRP) pipes
UP-GF (FRP) molded parts and connection
UP-GF-PP (FRP) molded parts and connection
UP-GF (FRP) adhesive collars
UP-GF (FRP) loose flanges

Plastic pipes


Calculator for cutting pipes
Guidelines for sawing plastic pipe
Leftovers in plastic pipe
Standardization of plastic pipes and molded parts
PVC U pipes deviations
Pressure loss in pipe systems out of PVC U, PVC C and ABS pipe systems
Distinction between Rp, R and G threads
Screw lengths for flange connections

Plastic fittings


PVC U transparent ball valves
Diaphragm valves
Block valves
Butterfly valves
Plastic needle valves
 

Plastic Valves according to ATEX


New EU guideline 2014/34/EU
Plastic Valves in EX zones
Y-Strainers PP-EL DN 15 - DN 50
Check valves PP-EL DN 15 - DN 50
Angle seat valves PP-EL DN 15 - DN 50

Bonding of plastic pipes


Bonding manual
Video showing the bonding of pipes

Plastic welding


Guidelines for extrusion welding


Grids / support grids


GFK grids
Grids out of PP -el electrically conductive
Profile support grids out of PP -el electrically conductive


Molded ventilation parts


Ventilation technology


Chemical hose


PVC transparent hose with fabric inlay


Industrial tanks and chemical containers


Dosing tanks and outer containers 35 – 1000 Liter
Salt dissolving tanks 60 -5000 Liter
Storage tanks and vats
Storage tanks for water
Safety and collecting troughs
Industrial tank delivery program
Dosing tanks with agitator
Dosing tank agitators
Dosing tanks with attachments
Dosing tanks made of sheet material
Customized chemical containers
Dosing tanks with level indicators



 

IBC TANKS/CONTAINERS


IBC screw caps DN 150/DN 200
IBC adapters out of PE
IBC adapters out of PP
MULTI FLEX BLOCK for IBC BULK CONTAINER



Attachment parts for tank construction


Vapor separators
CO2 - absorbes
Manholes
Revision nozzles
Block flange

Filter housings and filter cartridges


PENTEK 3G Slime Line filter housings
PENTEK 3G Standard filter housings
PENTEK Big Blue filter housings
PENTEK PP high temperature filter housings
PENTEK PP all nature filter housings
PENTEK filter bags for Big Blue filter housings
PENTEK surface filter cartridges
PENTEK filter cartridges for depth filtration
PENTEK filter cartridges with activated carbon
CINTROPUR filter systems
CINTROPUR water filters

Flange configurator


Blind flanges, loose flanges,  rectangular flanges

Chemical resistance


Table of chemical resistance for plastic pipe systems
 

Machined plastic parts


Inserts
Screw-in parts
Threaded fittings
Screw fittings

Milled plastic parts


Loose flanges and blind flanges made of sheet material

Static mixers


Static mixers made of plastic

Strainers


Single-type and double-type strainers
Pot strainer DN 300
Angle seat strainer DN 500


Flow meters


Variable area flow meters
Configuration tool for flow meters

Filter presses


Laboratory filter presses

Injection molded parts


Scraper made of PE for filter press


OUR - PREMIUM PARTNERS -



 
         
 
 
 
 
       
 
         
 
VIDEO
ONLINE TOOLS
REQUEST A QUOTE
STARTING A PROJECT REQUEST