Technical information PP-R / PP-RCT Pipe Systems Compared to PE, PP-R has higher rigidity, particularly in the upper temperature range. The high resistance to chemicals and good long-term properties compared to many other materials, even at high temperatures, are characteristic for PP-R. Material: PP-R (Polypropylene-Random-Copolymerisate) with high molecular weight and high-heat stabilised, RAL 6017 May green. Standards/approvals: • DIN EN ISO 15874 • DVGW (German Association for Gas and Water Applications) • Corresponds to the KTW recommendation of the Federal Environmental Agency (UBA) Characteristics: • Good resistance to chemicals • Weather resistant • Excellent processing Joining methods: • Heating element socket welding • Heating coil socket welding • Heating element butt welding

PP-RCT PIPE SYSTEMS A new generation of material, thanks to its structure, pipes and fittings can be produced with higher hydraulic capacity or with higher compressive strength. This means that - for the same application case - if the pipes are produced with thinner walls, they have higher flow capacity with a consistent outer diameter. In contrast, PP-RCT pipe can be subject to higher pressures than the previous PP-R pipes, with the same outer diameter and the same wall thickness. Material: Polypropylene-random-copolymer with a modified crystalline structure and increased temperature resistance, RAL 6024 traffic green. Standards/approvals: • DIN EN ISO 15874 • DIN 8077/ 8078 • Corresponds to the KTW recommendation of the Federal Health Agency (BGA). • WRAS • NSF Characteristics: • Good resistance to chemicals • Weather-resistant • Excellent processing capability Jointing methods: • Socketfusion • Electrofusion • Buttfusion

PP-RCT Pressure pipe POWERTEC-CT PP-RCT Pressure pipe POWERTEC-CT, single-layer, SDR7,4. Homogeneous pipe for very high pressures and high temperatures. Material PP-RCT (Polypropylene Random-Copolymer Temperature resistant) with modified crystalline structure (beta nucleated) and increased temperature resistance, Borealis RA7050GN, colour RAL 6024 traffic green.The material complies with the requirements of the KTW guideline of the German Federal Environmental Agency (UBA). Geometric Properties Outside diameter and wall thickness according to DIN 8077 and DIN EN ISO 15874. Operating Pressure 20°C/2.0MPa  •  70°C/1.0MPa. Type Suitable for socket-welding, butt-welding and electrofusion- socket-welding accor-ding to DVS technical code 2207. Welding equipment according to DVS technical code 2208. Certification B-R pipes succumb frequent internal and external quality controls. The pipes fulfill the requirements of the DIN Certco guideline ZP 10.25.1 and NSF14 + 61, AENOR and ÖVGW

PP-RCT Pressure pipe ECONTEC-CT PP-RCT Pressure pipe ECONTEC-CT, single-layer, SDR9 up to 11. Homogeneous pipe for high pressures and high temperatures with simultaneous high flow. Material PP-RCT (Polypropylene Random-Copolymer Temperature resistant) with modified crystalline structure (beta nucleated) and increased temperature resistance, Borealis RA7050GN, colour RAL 6024 traffic green. The material complies with the requirements of the KTW guideline of the German Federal Environmental Agency (UBA). Geometric Properties Outside diameter and wall thickness according to DIN 8077 and DIN EN ISO 15874. Operating Pressure 20°C/1.6MPa  •  60°C/0.8MPa. Type Suitable for socket-welding, butt-welding and electrofusion- socket-welding according to DVS technical code 2207. Welding equipment according to DVS technical code 2208. Certification B-R pipes succumb frequent internal and external quality controls. The pipes fulfill the requirements of the DIN Certco guideline ZP 10.25.1.

PP-RCT Pressure pipe CYCLETEC-CT PP-RCT Pressure pipe CYCLETEC-CT, single-layer with outer layer in lilac, SDR9 up to 11. Homogeneous pipe for high pressures and high temperatures with simulta-neous high flow.Color-coded and labeled to identify it as a non-potable line. For applications like rain, recyled or reclaimed water for cleaning, flush, laundry or irrigation. Material PP-RCT (Polypropylene Random-Copolymer Temperature resistant) with modified crystalline structure (beta nucleated) and increased temperature resistance, Borealis RA7050GN, colour RAL 6024 traffic green. The material complies with the requirements of the KTW guideline of the German Federal Environmental Agency (UBA). Outer layer made of PP-R in lilac color. Geometric Properties Outside diameter and wall thickness according to DIN 8077 and DIN EN ISO 15874. Operating Pressure 20°C/1.6MPa  •  60°C/0.8MPa. Type Suitable for socket-welding, butt-welding and electrofusion-socket- welding according to DVS technical code 2207. Welding equipment according to DVS technical code 2208. Certification B-R pipes succumb frequent internal and external quality controls

PP-RCT Pressure pipe STABITEC-CT OT PP-RCT Pressure pipe STABITEC-CT OT, multi-layer, with outer Aluminium-layer for reduced axial expansion, SDR7,4 up to 9. Oxygen-tight according to DIN 4726.Homogeneous pipe for high pressures and high temperatures, with simultaneous high flow and highly reduced expansion. The Aluminium-layer must be removed prior to welding. Material PP-RCT (Polypropylene Random-Copolymer Temperature resistant) with modified crystalline structure (beta nucleated) and increased temperature resistance, Borealis RA7050GN, colour RAL 6024 traffic green. The material complies with the requirements of the KTW guideline of the German Federal Environmental Agency (UBA). Outer PP-RCT-protection-layer in green color. Geometric Properties Outside diameter and wall thickness of the inner pipe according to DIN 8077 and DIN EN ISO 15874. Operating Pressure 20°C/2.0MPa  •  70°C/1.0MPa. Type Suitable for socket-welding, butt-welding and electrofusion-socket- welding according to DVS technical code 2207. Welding equipment according to DVS technical code 2208. Certification B-R pipes succumb frequent internal and external quality controls. The  pipes fulfill the requirements of the DIN Certco guideline ZP 9.18.1.

PP-RCT Pressure pipe CLIMATEC PP-RCT Pressure pipe CLIMATEC, multi-layer, with fiber-middle-layer for reduced axial expansion, SDR7,4 up to 17. Optionally available with a blue outer layer.For normal pressures and high temperatures, very high flow and reduced expansion.Fiber-pipes can be, analogue to normal pipes, directly welded without a prior pro-cessing step. Material PP-RCT (Polypropylene Random-Copolymer Temperature resistant) with modified crystalline structure (beta nucleated) and increased temperature resistance, Borealis RA7050GN, colour RAL 6024 traffic green.The material complies with the requirements of the KTW guideline of the German Federal Environmental Agency (UBA). Geometric Properties Outside diameter and wall thickness according to DIN 8077 and DIN EN ISO 15874. Operating Pressure Up to D125 = 20°C/1.6MPa  •  70°C/0.8MPa.From D160 = 20°C/1.0MPa  •  70°C/0.5MPa. Type Suitable for socket-welding, butt-welding and electrofusion-socket- welding according to DVS technical code 2207. Welding equipment according to DVS technical code 2208. Certification B-R pipes succumb frequent internal and external quality controls. The pipes fulfill the requirements of the DIN Certco guideline ZP 9.12.1 and NSF14 + 61.

PP-RCT pressure pipes WATERTEC The PP-RCT pressure pipes WATERTEC are available with an additional outer black protective layer against UV irradiation.The protective layer consists of PP-R material and is designed for Central European conditions. Material PP-RCT (Polypropylene Random-Copolymer Temperature resistant) with modified crystalline structure (beta nucleated) and increased temperature resistance, Borealis RA7050GN, colour RAL 6024 traffic green. The material complies with the requirements of the KTW guideline of the German Federal Environmental Agency (UBA). Outer PP-R UV-protection-layer in black color. Geometric Properties and Operating Pressure See explanations for the listed pipe types

Pre-insulated plastic sheathing pipes for direct laying Production is carried out by order. Medium pipe BR plastic pipes (except STABITEC) in the dimensions D20 to 500 mm. Casing pipe Seamlessly extruded PE-HD casing pipe, impact and break resistant, tough to -50°C, general quality requirements according to DIN 8075, dimensions and wall thickness according to DIN EN 253, Corona treated. Typ Made of foamed polyurethane rigid foam, CFC-free, propellant cyclopentane, bet-ween medium pipe and protective sheath in the composite, heat transfer coefficient Lambda min. 0.026 W/mK.Insulation thickness DS1: Standard according to DIN EN 253

Optimize your shopping experience with our detailed delivery information

Plastic pipe systems Overview of plastic pipe systems Technical information on ABS pipe systems Technical information on PVC  U pipe systems Technical information on PVC  U transparent pipe systems Technical information on PVC  C pipe systems Technical information on PP pipe systems Technical information on PP-R pipe systems Technical information on PE pipe systems Technical information on PVDF pipe systems Chemiedur - pipe Technical information on UP-GF (FRP) pipe systems UP-GF (FRP) pipes UP-GF (FRP) molded parts and connection UP-GF-PP (FRP) molded parts and connection UP-GF (FRP) adhesive collars UP-GF (FRP) loose flanges Pot Strainer DN 200 - DN 500 Inliner PP/FRP Coated Pot Strainer DN 200 - DN 500 Inliner FRP/CBL Coated Angle Seat Strainer DN 200 - DN 400 Inliner FRP/CBL Coated Manhole mad of FRP and PP/FRP Plastic pipes Calculator for cutting pipes Guidelines for sawing plastic pipe Leftovers in plastic pipe Standardization of plastic pipes and molded parts PVC U pipes deviations Pressure loss in pipe systems out of PVC U, PVC C and ABS pipe systems Distinction between Rp, R and G threads Screw lengths for flange connections Plastic fittings PVC U transparent ball valves Diaphragm valves Block valves Butterfly valves Plastic needle valves

Plastic Valves according to ATEX New EU guideline 2014/34/EU Plastic Valves in EX zones Y-Strainers PP-EL DN 15 - DN 50 Check valves PP-EL DN 15 - DN 50 Angle seat valves PP-EL DN 15 - DN 50 Bonding of plastic pipes Bonding manual Video showing the bonding of pipes Plastic welding Guidelines for extrusion welding Grids / support grids GFK grids Grids out of PP -el electrically conductive Profile support grids out of PP -el electrically conductive Molded ventilation parts Ventilation technology Chemical hose PVC transparent hose with fabric inlay Industrial tanks and chemical containers Dosing tanks and outer containers 35 – 1000 Liter Salt dissolving tanks 60 -5000 Liter Storage tanks and vats Storage tanks for water Safety and collecting troughs Industrial tank delivery program Dosing tanks with agitator Dosing tank agitators Dosing tanks with attachments Dosing tanks made of sheet material Customized chemical containers Dosing tanks with level indicators

IBC TANKS/CONTAINERS IBC screw caps DN 150/DN 200 IBC adapters out of PE IBC adapters out of PP MULTI FLEX BLOCK for IBC BULK CONTAINER Attachment parts for tank construction Vapor separators CO2 - absorbes Manholes Revision nozzles Block flange Filter housings and filter cartridges PENTEK 3G Slime Line filter housings PENTEK 3G Standard filter housings PENTEK Big Blue filter housings PENTEK PP high temperature filter housings PENTEK PP all nature filter housings PENTEK filter bags for Big Blue filter housings PENTEK surface filter cartridges PENTEK filter cartridges for depth filtration PENTEK filter cartridges with activated carbon CINTROPUR filter systems CINTROPUR water filters Flange configurator Blind flanges, loose flanges,  rectangular flanges Chemical resistance Table of chemical resistance for plastic pipe systems

Machined plastic parts Inserts Screw-in parts Threaded fittings Screw fittings Milled plastic parts Loose flanges and blind flanges made of sheet material Static mixers Static mixers made of plastic Strainers Single-type and double-type strainers Pot strainer DN 300 Angle seat strainer DN 500 Flow meters Variable area flow meters Configuration tool for flow meters Filter presses Laboratory filter presses Injection molded parts Scraper made of PE for filter press Kwerk Practice Blog The Kwerk team blogs from the field here

Partnership at the highest level.