ATEX > Ventilation

Overview categories		Overview all products

PP-EL-s pipe, extruded, electrically conductive, color black, with smooth ends, minimum order quantity: 5000 mm

[Zum Artikel]

PP-EL-s Rohr, aus Platten gefertigt , elektrisch leitfähig, Farbe schwarz, mit glatten Enden, Mindestabnahmemenge: Rohrlänge 3000 mm

[Zum Artikel]

PP-el-s pipe bend with sockets 90° R=DA, electrically conductive

[Zum Artikel]

PP-EL-s pipe bend with sockets 75° R=DA, electrically conductive

[Zum Artikel]

PP-EL-s pipe bend with sockets 60° R=DA, electrically conductive

[Zum Artikel]

PP-EL-s Rohrbogen mit Muffen 45° R=DA, elektrisch leitfähig

[Zum Artikel]

PP-EL-s pipe bend with sockets 30° R=DA, electrically conductive

[Zum Artikel]

PP-EL-s pipe bend with sockets 15° R=DA, electrically conductive

[Zum Artikel]

PP-EL-s T-piece with sockets, outlet 90°, electrically conductive

[Zum Artikel]

PP-EL-s T-piece with sockets, outlet 45°, electrically conductive

[Zum Artikel]

PP-EL-s double socket, electrically conductive

[Zum Artikel]

PP-EL-s reducer with sleeves, electrically conductive

[Zum Artikel]

PP-EL-s flange with socket, electrically conductive

[Zum Artikel]

PP-EL-s blind flange, electrically conductive

[Zum Artikel]

PP-el base flex sleeve 6-fold corrugated for fastening with tensioning strap, electrically conductive

[Zum Artikel]

PP-el base flex sleeve 4-fold corrugated for fastening with tensioning strap, electrically conductive

[Zum Artikel]

PP-el basic flexible sleeve 6-fold corrugated with socket connection PPs-el, electrically conductive

[Zum Artikel]

PP-el basic flexible sleeve 4-fold corrugated with socket connection PPs-el, electrically conductive

[Zum Artikel]

PP-el Basis Kugelmanschette für Befestigung mit Spannband, elektrisch leitfähig

[Zum Artikel]

PP-el basic flex sleeve tape 6-fold corrugated, 150x3 mm, 30 m on roll, electrically conductive

[Zum Artikel]

Stainless steel turnbuckle strap for cuff fastening, electrically conductive

[Zum Artikel]

PP-EL-s deflector cover with sleeve, electrically conductive

[Zum Artikel]

PP-EL-s deflector cover with flange, electrically conductive

[Zum Artikel]

PP-EL-s saddle connector 90° outlet, electrically conductive

[Zum Artikel]

PP-EL-s saddle connector 45° outlet, electrically conductive

[Zum Artikel]

PP-EL-s trouser T-piece 90° outlet, with sockets, electrically conductive

[Zum Artikel]

PP-EL-s roof top 0°, electrically conductive

[Zum Artikel]

PP-EL-s roof attachment 1 - 22°, electrically conductive

[Zum Artikel]

PP-EL-s roof attachment 23°- 45°, electrically conductive

[Zum Artikel]

PP-EL-s rain collar, electrically conductive

[Zum Artikel]

PP-EL-s non-return flap with sleeve for vertical installation, version 1, electrically conductive

[Zum Artikel]

PP-EL-s bird screen 30° with mesh panel, electrically conductive

[Zum Artikel]

PPs-EL-s end caps, electrically conductive

[Zum Artikel]

PP-EL-s cleaning opening, electrically conductive

[Zum Artikel]

PP-EL-s T-piece 90° with sockets with cleaning opening, electrically conductive

[Zum Artikel]

Flat gasket made of EPDM for flanges and blind flanges, electrically conductive

[Zum Artikel]

PP-el-s butterfly valve with handle and 15° louvre, socket on both sides, electrically conductive

[Zum Artikel]

PP-el-s throttle valve with handle and 15° grid, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s throttle valve with rotary knob and 15° grid, sleeve on both sides, electrically conductive

[Zum Artikel]

PP-el-s throttle valve with rotary knob and 15° grid, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s throttle valve with infinitely variable rotary knob, sleeve on both sides, electrically conductive

[Zum Artikel]

PP-el-s throttle valve with infinitely variable rotary knob, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s butterfly valve with handle, 15° grid, with seal, sleeve on both sides, electrically conductive

[Zum Artikel]

PP-el-s butterfly valve with handle, 15° grid, with seal, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s butterfly valve, rotary knob, 15° grid, seal, sleeve on both sides, electrically conductive

[Zum Artikel]

PP-el-s butterfly valve, rotary knob, 15° louvre, seal, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s butterfly valve, rotary knob stepless, with seal, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s butterfly valve, rotary knob stepless, with seal, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s control damper, transverse motor support plate, socket on both sides, electrically conductive

[Zum Artikel]

PP-el-s control damper, transverse motor support plate, flange on both sides, electrically conductive

[Zum Artikel]

PP-el-s control damper, motor support plate in pipe direction, socket on both sides, electrically conductive

[Zum Artikel]

PP-el-s control damper, motor support plate in pipe direction, flange on both sides, electrically conductive

[Zum Artikel]

ATEX: Confidence in safety, expertise in explosion protection

source: OPEN AI

ATEX is a designation that is often used in connection with explosion protection within the European Union. The name ATEX is derived from the French term "ATmosphères EXplosibles". These are two EU directives that are intended to ensure the protection of persons and property in potentially explosive atmospheres. These directives are:

1.) ATEX 2014/34/EU (formerly 94/9/EC) - Equipment and protective systems intended for use in potentially explosive atmospheres:
This directive regulates the placing on the market of products used in potentially explosive atmospheres. Manufacturers must ensure that their products are designed and manufactured in such a way that they do not endanger the health and safety of persons or the protection of property when used as intended.

2) ATEX 1999/92/EC (also known as the "ATEX Directive"):
This directive is addressed to the employer and concerns the minimum requirements for the protection of the safety and health of workers potentially at risk from explosive atmospheres. It requires employers to assess the risk of explosions and take appropriate protective measures. This includes the division of areas into zones based on the frequency and duration of the occurrence of hazardous explosive atmospheres.

For products covered by the ATEX directives, a CE marking is required to indicate that the product complies with the applicable EU requirements, including those for explosion protection. In addition to the CE marking, products used in potentially explosive atmospheres must bear the special ATEX mark (a hexagon with the word ’Ex’).

The implementation of these directives requires manufacturers to have extensive knowledge of the properties of gases, vapors and dusts with regard to their explosive properties. Operators of systems in which explosive atmospheres can occur must also develop and implement suitable safety concepts in order to minimize the risk of an explosion and ensure the safety of employees.

In practice, this means that equipment and protective systems used in such areas must be designed in such a way that they cannot be a source of ignition, for example through sparking or excessive heat generation. The requirements vary depending on the specific zone in which the equipment is used and the type of explosive atmosphere (e.g. gas or dust).

source: OPEN AI

The ATEX directives cover a wide range of products and protective measures to ensure safety in potentially explosive atmospheres. Here is more detailed information and aspects of the ATEX topic:

Zoning

A central aspect of the ATEX directives is the classification of areas into zones. This classification is based on the type, frequency and duration of the occurrence of an explosive atmosphere.

For gases, vapors and mists:
Zone 0:An area in which an explosive gas atmosphere is present continuously or for long periods.
Zone 1: An area in which an explosive gas atmosphere may occasionally form under normal operating conditions.
Zone 2: A place in which an explosive gas atmosphere is not likely to occur in normal operation but, if it does occur, will persist for a short period only.

For dusts:
Zone 20: An area in which an explosive dust cloud is present in the air continuously or for long periods.
Zone 21: An area in which an explosive dust cloud may occasionally form under normal operating conditions.
Zone 22: An area in which an explosive dust cloud does not occur under normal operating conditions and only for short periods.

Equipment categories

The devices and protective systems that fall under ATEX 2014/34/EU are divided into different categories according to their place of use, which indicate the level of protection required:

- Category 1 (Zone 0 or 20): Highest level of protection; equipment must provide safety even in the event of two independent malfunctions.
- Category 2 (Zone 1 or 21): High level of protection; devices must provide a high level of safety and remain safe in the event of a malfunction.
- Category 3 (Zone 2 or 22): Normal level of protection; devices must be safe under normal operating conditions.

Labeling

Products designed for use in potentially explosive atmospheres must bear additional information in addition to the CE marking, including
- The Ex symbol in a hexagon.
- The group and category of the device.
- The gas or dust group for which the appliance is suitable.
- The temperature class or maximum surface temperature.

Conformity assessment procedure

The ATEX Directive stipulates that products must undergo a conformity assessment procedure before they are placed on the market. This may include internal production controls, type testing and in some cases the involvement of a notified body, depending on the category of equipment.
Important aspects for operators

For operators of equipment in potentially explosive atmospheres, the requirements of ATEX 1999/92/EC (operating directive) are particularly relevant. These stipulate that operators must create an explosion protection document that includes the following:

- Assessment of the explosion risk.
- Measures to prevent explosions.
- Measures to protect against the effects of an explosion in order to safeguard the health of employees.

Compliance with the ATEX directives is not only crucial for safety in the workplace, but is also a legal requirement in the EU. The implementation of these directives requires close cooperation between manufacturers, plant operators, engineers and safety experts in order to develop innovative and safe solutions for dealing with explosive atmospheres.