FITTINGS AND CONNECTIONS MADE OF UP-GF AS PER DIN 16 966

Fittings made of glass fibre reinforced polyester resins are produced according to DIN 16966, section 2, section 4 and section 5, on the basis of unsaturated polyester resins (UP resins), which are ideally suited for chemical usage under conditions of positive and negative pressure. Glass fibre reinforced plastic (GFRP) on the basis of unsaturated polyester resins, including phenacrylate resins is natural coloured, but can be dyed depending on application and use. Basically this material is flammable, however by adding appropriate aggregates in production, the state of "low flammability" or "self-extinguishing" can be reached. By adding graphite, the material will become conductive. Kwerk GmbH delivers liner materials for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. Our new product line: The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride Our UP-GF fittings are free from defects, like air bubbles and cracks. The laminate structure according to DIN 16966 is guaranteed for the entire length. On principle, other UP-GF structures are available on request. During manufacture of UP-GF, all sealing surfacec and seams are properly laminated. Further technical information you will find here.

DIN 16 966 regulates specific designs, quality and audit of UP-GF fittings. This includes in particular - Negative pressure load - Layer structure and glass contents - Styrene content - Surface quality - Behaviour towards chemicals - Adherence and rigidity - Hygienic and toxicological safety - Fire behaviour - Dimensions - Audit - Short-time internal pressure tests Our team, having nearly 40 years of work experience in production and application of UP-GF fittings and connections, will be pleased to answer any additional questions. Just call us: 0049 2602 999730

SUPPLY RANGE DN 25 - DN 1000 UP-GF ELBOW 90° FOR PIPE TYPE D

The elbows are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. Product description UP-GF (pure GFRP): elbow 90°, according to pipe type D, form E1, nominal diameter DN 100 and nominal pressure PN 10, with laminated ends in L form. ELBOW DIN 16 966 - E1 D 100 - 10 L Composite materials / Liner: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the elbow 90° out of GFRP also online in our webshop.

Nominal diameter DN Inside diameter typ of pipe D d2 Inside diameter type of pipe B d2 overall length 25 25 32 110 (32) 32 40 130 40 40 50 150 50 50 63 180 65 65 75 140 80 80 90 165 100 100 110 205 (125) 125 125 245 150 150 160 285 200 200 200 365 250 250 250 450 300 300 300 525 350 250 355 600 400 400 400 680 500 500 500 830 600 600 600 950 700 700 710 1100 800 800 800 1250 900 900 900 1400 1000 1000 1000 1500   Dimensions correspond to DIN 16 966, part 2 All dimensions in mm d 2 corresponds to the outer diameter of the lining for pipe type B. Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1 Pressures are pressures in bar

UP-GF ELBOW 45° FOR PIPE TYPE D

The elbows are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. Product description UP-GF (pure GFRP): elbow 45°, according to pipe type D, form E2, nominal diameter DN 100 and nominal pressure PN 10, with laminated ends in L form. ELBOW DIN 16 966 - E2 D 100 - 10 L Composite materials / Liner: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the elbow 45° out of GFRP also online in our webshop.

Nominal diameter DN inside diameter type of pipe D d2 Inside diameter type of pipe B d2 overall length e 25 25 32 70 (32) 32 40 80 40 40 50 90 50 50 63 105 65 65 75 85 80 80 90 100 100 100 110 115 (125) 125 125 135 150 150 160 150 200 200 200 190 250 250 250 225 300 300 300 260 350 250 355 290 400 400 400 325 500 500 500 390 600 600 600 430 700 700 710 490 800 800 800 545 900 900 900 605 1000 1000 1000 660   Dimensions correspond to DIN 16 966, part 2 All dimensions in mm d 2 corresponds to the outer diameter of the lining for pipe type B. Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1 Pressures are pressures in bar

UP-GF T-PIECE 90° FOR PIPE TYPE D

The T-pieces are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. Product description UP-GF (pure GFRP): T-piece 90°, according to pipe type D, form T1, nominal diameter DN 100 and nominal pressure PN 10, with laminated ends in L form. T-PIECE DIN 16 966 - T1 D 100 - 10 L Composite materials / Liner: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the T-piece 90° out of GFRP also online in our webshop.

Nominal diameter DN Inside diameter type of pipe D d2 Inside diameter type of pipe D d2 overall length e 25 25 32 110 (32) 32 40 130 40 40 50 150 50 50 63 180 65 65 75 140 80 80 90 165 100 100 110 205 (125) 125 125 245 150 150 160 285 200 200 200 365 250 250 250 450 300 300 300 535 350 350 355 600 400 400 400 680 500 500 500 830 600 600 600 950 700 700 710 1100 800 800 800 1250 900 900 900 1400 1000 1000 1000 150   Dimensions correspond to DIN 16 966, part 4 All dimensions in mm d 2 corresponds to the outer diameter of the lining for pipe type B. Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1 Pressures are pressures in bar

UP-GF T-PIECE 90° WITH REDUCED BRANCH FOR PIPE TYPE D

The T-pieces with reduced branch are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. Product description UP-GF (pure GFRP): T-piece 90° with reduced branch, according to pipe type D,  nominal passage diameter DN1 =100 and branch nominal diameter DN2 = 80, with laminated ends in L form. T-PIECE DIN 16 966 - T2 D 100 x 80 L Composite materials / Liner: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the T-piece 90° out of GFRP with reduced branch also online in our webshop.

passageway branch e 1 e 2 passageway branch e 1 e 2 DN 1 d 2 DN 2 d 2 DN 1 d 2 DN 2 d 2 type of pipe D typ of pipe B (32) 32 25 25 130 170 (32) 40 25 32 130 175 40 40 25 (32) 25 32 150 175 40 50 25 (32) 32 40 150 180 50 50 25 (32) 40 25 (32) 40 180 180 50 63 25 (32) 40 (32) 40 50 180 185 65 65 (32) 40 50 (32) 40 50 140 190 65 75 (32) 40 50 40 50 63 140 195 80 80 40 50 65 40 50 65 165 195 80 90 40 50 65 50 63 75 165 200 100 100 50 65 80 50 65 80 205 205 100 110 50 65 80 63 75 90 205 210 (125) 125 65 80 100 65 80 100 245 270 (125) 125 65 80 100 75 90 110 245 270 150 150 80 100 (125) 80 100 125 285 240 240 290 150 160 80 100 (125) 90 110 125 285 240 240 290 200 200 100 (125) 150 100 (125) 150 365 260 310 310 200 200 100 (125) 150 110 125 160 365 260 310 310 250 250 (125) 150 200 125 150 200 450 340 250 250 (125) 150 200 125 160 200 450 340 300 300 150 200 250 150 200 250 525 360 365 415 300 300 150 200 250 160 200 250 525 360 365 415 350 350 200 250 300 200 250 300 600 395 445 445 300 355 200 250 300 200 250 300 600 395 445 445 400 400 250 300 350 250 300 350 680 470 470 520 400 400 250 300 350 250 300 355 680 470 470 520 500 500 300 350 400 300 350 400 680 535 575 575 500 500 300 350 400 300 355 400 830 525 575 575 600 600 350 400 500 350 400 500 950 620 620 670 600 600 350 400 500 355 400 500 950 620 620 670 700 700 400 500 600 400 500 600 1000 675 725 750 700 710 400 500 600 400 500 600 1100 675 625 750 800 800 500 600 700 500 600 700 1250 775 800 800 800 800 500 600 700 500 600 710 1250 675 725 750 900 900 600 700 800 600 700 800 1400 850 900 900 600 700 800 600 710 800 1400 850 1000 1000 700 800 900 700 800 900 1500 905 1000 1000 700 800 900 710 800 900 1500 905   Dimensions correspond to DIN 16 966, part 4 All dimensions in mm d 2 corresponds to the outer diameter of the lining for pipe type B. Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1 Pressures are pressures in bar

UP-GF NOZZLE WITH PRE-FORMED COLLAR FOR PIPE TYPE D

Nozzles with pre-formed collar made of UP-GF (GFRP) are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. On request, the pre-formed collars can be customer-specific designed and combined already in our workshop with all pipe lengths. Product description UP-GF (pure GFRP): Pre-formed collar, according to pipe type D, form B2,  nominal diameter DN 100 and nominal pressure PN 10, with laminated ends in L form. COLLAR DIN 16 966 - B2 D 100 - 10 L Composite materials / Liner: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the nozzle with pre-formed collar out of GFRP also online in our webshop.

Nominal diameter DN Max. Pressure PN d 4 d 5 b 3 h 2 25 16 68 60 12 30 (32) 16 78 58 14 32 40 16 88 68 14 35 50 16 102 82 14 40 65 10 122 95 15 44 80 10 138 111 16 48 100 10 158 133 18 55 (125) 10 188 160 20 64 150 10 212 188 22 71 200 6 268 237 25 85 250 6 320 293 38 101 300 6 370 343 30 116 350 4 430 387 32 133 400 4 482 441 35 147 500 4 585 544 38 178 600 2,5 685 648 45 209 700 2,5 800 758 53 243 800 2,5 905 858 57 271 900 2,5 1005 960 60 302 1000 2,5 1110 1060 64 332   Dimensions correspond to DIN 16 966, part 2 All dimensions in mm Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1 Pressures are pressures in bar

UP-GF NOZZLE WITH FIXED FLANGE FOR PIPE TYPE D

UP-GF (GFRP) fixed flanges are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. On request, the pre-formed flanges can be customer-specific designed and combined already in our workshop with all pipe lengths. Product description UP-GF (pure GFRP): Pre-formed flange, according to pipe type D, form V3,  nominal diameter DN 100 and nominal pressure PN 10, for pipes with nominal pressure 2,5 with laminated ends in L form. FIXED FLANGE DIN 16 966 - V3 D 100 - 10 - 2,5 L Composite materials: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the pre-formed fixed flange out of GFRP also online in our webshop.

Nominal diameter DN Max. Pressure PN D d 2 d 3 Lk b 2 h 1 r 2 r 3 screw number screw thread 25 16 110 14 50 85 14 30 3 3 4 M 12 (32) 16 140 18 58 100 15 32 3 3 4 M16 40 16 250 18 68 110 16 35 3 3 4 M16 50 16 165 28 82 125 18 40 3 4 4 M16 65 20 285 18 95 145 20 44 3 4 4 M16 80 10 200 18 111 160 22 48 3 4 8 M16 100 10 220 18 133 180 24 55 4 5 8 M16 (125) 10 250 18 160 210 27 64 4 5 8 M16 150 10 285 22 188 240 30 71 4 5 8 M 20 200 6 340 22 245 295 33 80 5 8 8 M 20 250 6 395 22 300 350 37 90 5 8 12 M 20 300 6 445 22 350 400 42 100 5 8 12 M 20 350 4 505 22 410 460 40 95 6 8 16 M 20 400 4 565 26 460 515 44 105 6 8 16 M 24 500 4 670 26 565 620 49 120 6 8 20 M 24 600 2,5 780 30 660 725 49 115 7 8 20 M 27 700 2,5 895 30 780 840 53 125 7 8 24 M 27 800 2,5 1015 33 875 950 57 135 7 8 24 M 30 900 3,5 1115 33 980 1050 60 150 7 8 28 M 30 1000 2,5 1230 36 1080 1160 65 155 7 8 28 M 33   Dimensions correspond to DIN 16 966, part 6 Flange connection dimensions comply with DIN 2501 Part 1, PN 10 All dimensions in mm Material: unsaturated polyester resin and textile glass as specified in DIN 16 966, Part 1 Pressures are pressures in bar

UP-GF REDUCER - CONCENTRIC, FOR PIPE TYPE D

UP-GF (GFRP) reducers are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. Product description UP-GF (pure GFRP): Reducer concentric, according to pipe type D, form C2, reduces from nominal diameter DN 100 to DN 80, nominal pressure PN 10, with plain laminated ends in L form. REDUCER DIN 16 966 - V3 D 100 - 10 - 2,5 L Composite materials: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the concentric reducer out of GFRP also online in our webshop.

UP-GF REDUCER - ECCENTRIC, FOR PIPE TYPE D

UP-GF (GFRP) reducers are connected with pipes of the corresponding type or with other fittings by means of flange connections or laminate joints. Product description UP-GF (pure GFRP): Reducer eccentric, according to pipe type D, form X2,  reduces from nominal diameter DN 100 to DN 80, nominal pressure PN 10, with plain laminated ends in L form. REDUCER DIN 16 966 - X2 D 100 x 80 - 10  L Composite materials: Kwerk GmbH delivers also liner materials (composite materials) for pipes and fittings according to the relevant DIN standard 16965 section 2/ pipe type B. The following are part of our delivery program: - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour grey - Liner GFRP-PVC U plasticizer-free polyvinylchloride as per DIN 8061, colour red - Liner PVC C post-chlorinated polyvinylcloride as per DIN 8080 - Liner GFRP-PE-HD high-density polyethylene as per DIN 8075 - Liner GFRP-PP polypropylene as per DIN 8078 - Liner PVDF polyvinylidenfluoride You can purchase the eccentric reducer out of GFRP also online in our webshop.

Reducer L 1 L 2 L 3 L 4 L 5 Reducer L 1 L 2 L 3 L 4 DN1 d2 DN2 d2 DN1 d2 DN2 d2 type of pipe D type of pipe B (32) 32 25 25 180 85 20 20 95 (32) 40 25 32 180 85 20 20 40 40 25 25 205 85 40 40 120 40 50 25 32 205 85 45 45 40 40 (32) 32 200 85 20 20 115 40 50 (32) 40 200 85 25 25 50 50 25 25 235 85 65 60 150 50 63 25 32 235 85 80 80 50 50 (32) 32 230 85 45 45 145 50 63 (32) 40 230 85 60 60 50 50 40 40 205 85 25 25 120 50 63 40 50 205 85 35 35 65 65 (32) 32 260 85 85 80 175 65 75 (32) 40 260 85 90 90 65 65 40 40 235 85 65 60 150 65 75 40 50 235 85 65 60 65 65 40 50 210 85 40 40 125 65 75 50 63 210 85 30 30 80 80 40 40 275 85 105 100 190 80 90 40 50 275 85 105 100 80 80 50 50 245 85 75 75 160 80 90 50 63 245 85 70 65 80 80 65 65 210 85 40 35 125 80 90 65 75 210 85 40 40 100 100 50 50 325 110 130 120 215 100 110 50 63 325 110 95 90 100 100 65 65 285 110 90 85 175 100 110 65 75 285 110 90 85 100 100 80 80 250 110 50 50 135 100 110 80 90 250 110 50 50 (125) 125 65 65 350 110 155 150 240 (125) 125 65 75 350 110 130 125 (125) 125 80 80 310 110 115 110 200 (125) 125 80 90 310 110 90 85 (125) 125 100 100 285 110 65 60 175 (125) 125 100 110 285 110 40 40 150 150 80 80 375 110 180 175 265 150 160 80 90 375 110 180 175 150 150 100 100 350 110 130 125 240 150 160 100 110 350 110 130 125 150 150 (125) 125 310 110 65 60 175 150 160 (125) 125 310 110 90 85 200 200 100 100 495 127 255 245 370 200 200 100 110 495 127 230 225 200 200 (125) 125 430 127 195 185 305 200 200 (125) 125 430 127 195 185 200 200 150 150 370 127 130 125 245 200 200 150 160 370 127 105 100 250 250 (125) 125 575 143 320 310 435 250 250 (125) 125 575 143 320 310 250 250 150 125 510 143 255 245 365 250 250 150 160 510 143 230 225 250 250 200 200 400 143 130 125 255 250 250 200 200 400 143 130 130 300 300 150 150 655 158 385 370 495 300 300 150 160 655 158 360 345 300 300 200 200 540 158 255 245 380 300 300 200 200 540 158 255 245 300 300 250 250 435 158 130 125 275 300 300 250 250 435 158 130 125 350 350 200 200 665 150 385 370 515 350 355 200 200 665 150 400 385 350 350 250 250 550 150 255 245 400 350 355 250 250 550 150 270 260 350 350 300 300 440 150 130 125 290 350 355 300 300 440 150 140 135 400 400 250 250 695 166 385 370 530 400 400 250 250 695 166 385 370 400 400 300 300 580 166 255 245 415 400 400 300 300 580 166 255 245 400 400 350 355 450 166 130 125 285 400 400 350 355 450 166 115 110 500 500 300 300 865 191 515 495 675 500 500 300 300 865 191 515 495 500 500 350 350 730 191 385 380 540 500 500 350 355 730 191 375 360 500 500 400 400 615 191 255 245 425 500 500 400 400 615 191 255 245 600 600 350 350 980 181 645 620 80 600 600 350 355 980 181 630 605 600 600 400 400 865 181 515 495 685 600 600 400 400 865 181 515 495 600 600 500 500 630 181 255 245 450 600 600 500 500 630 181 260 245 700 700 400 400 1160 197 775 740 945 700 710 400 400 1160 197 795 765 700 700 500 500 930 197 515 495 695 700 710 500 500 930 197 540 520 700 700 600 600 660 197 255 245 440 700 710 600 600 660 197 280 270 800 800 500 500 1180 213 775 740 405 800 800 500 500 1160 213 770 740 800 800 600 600 910 213 515 495 700 800 800 600 600 910 213 515 495 800 800 700 700 665 213 255 245 450 800 800 700 710 665 213 230 220 900 900 600 600 1185 230 775 740 955 900 900 600 600 1185 230 770 740 900 900 700 700 945 230 515 495 980 900 900 700 710 945 230 490 470 900 900 800 800 700 230 255 245 470 900 900 800 800 700 230 255 245 1000 1000 700 700 1220 245 775 740 975 1000 1000 700 710 1220 245 745 715 1000 1000 800 800 975 245 515 495 730 1000 1000 800 800 975 245 515 495 1000 1000 900 900 735 245 255 245 490 1000 1000 900 900 735 245 255 245

Optimize your shopping experience with our detailed delivery information

Plastic pipe systems Overview of plastic pipe systems Technical information on ABS pipe systems Technical information on PVC  U pipe systems Technical information on PVC  U transparent pipe systems Technical information on PVC  C pipe systems Technical information on PP pipe systems Technical information on PP-R pipe systems Technical information on PE pipe systems Technical information on PVDF pipe systems Chemiedur - pipe Technical information on UP-GF (FRP) pipe systems UP-GF (FRP) pipes UP-GF (FRP) molded parts and connection UP-GF-PP (FRP) molded parts and connection UP-GF (FRP) adhesive collars UP-GF (FRP) loose flanges Pot Strainer DN 200 - DN 500 Inliner PP/FRP Coated Pot Strainer DN 200 - DN 500 Inliner FRP/CBL Coated Angle Seat Strainer DN 200 - DN 400 Inliner FRP/CBL Coated Manhole mad of FRP and PP/FRP Plastic pipes Calculator for cutting pipes Guidelines for sawing plastic pipe Leftovers in plastic pipe Standardization of plastic pipes and molded parts PVC U pipes deviations Pressure loss in pipe systems out of PVC U, PVC C and ABS pipe systems Distinction between Rp, R and G threads Screw lengths for flange connections Plastic fittings PVC U transparent ball valves Diaphragm valves Block valves Butterfly valves Plastic needle valves

Plastic Valves according to ATEX New EU guideline 2014/34/EU Plastic Valves in EX zones Y-Strainers PP-EL DN 15 - DN 50 Check valves PP-EL DN 15 - DN 50 Angle seat valves PP-EL DN 15 - DN 50 Bonding of plastic pipes Bonding manual Video showing the bonding of pipes Plastic welding Guidelines for extrusion welding Grids / support grids GFK grids Grids out of PP -el electrically conductive Profile support grids out of PP -el electrically conductive Molded ventilation parts Ventilation technology Chemical hose PVC transparent hose with fabric inlay Industrial tanks and chemical containers Dosing tanks and outer containers 35 – 1000 Liter Salt dissolving tanks 60 -5000 Liter Storage tanks and vats Storage tanks for water Safety and collecting troughs Industrial tank delivery program Dosing tanks with agitator Dosing tank agitators Dosing tanks with attachments Dosing tanks made of sheet material Customized chemical containers Dosing tanks with level indicators

IBC TANKS/CONTAINERS IBC screw caps DN 150/DN 200 IBC adapters out of PE IBC adapters out of PP MULTI FLEX BLOCK for IBC BULK CONTAINER Attachment parts for tank construction Vapor separators CO2 - absorbes Manholes Revision nozzles Block flange Filter housings and filter cartridges PENTEK 3G Slime Line filter housings PENTEK 3G Standard filter housings PENTEK Big Blue filter housings PENTEK PP high temperature filter housings PENTEK PP all nature filter housings PENTEK filter bags for Big Blue filter housings PENTEK surface filter cartridges PENTEK filter cartridges for depth filtration PENTEK filter cartridges with activated carbon CINTROPUR filter systems CINTROPUR water filters Flange configurator Blind flanges, loose flanges,  rectangular flanges Chemical resistance Table of chemical resistance for plastic pipe systems

Machined plastic parts Inserts Screw-in parts Threaded fittings Screw fittings Milled plastic parts Loose flanges and blind flanges made of sheet material Static mixers Static mixers made of plastic Strainers Single-type and double-type strainers Pot strainer DN 300 Angle seat strainer DN 500 Flow meters Variable area flow meters Configuration tool for flow meters Filter presses Laboratory filter presses Injection molded parts Scraper made of PE for filter press Kwerk Practice Blog The Kwerk team blogs from the field here

Partnership at the highest level.